SQlab 311 2.0 Handlebar

The SQlab 311 2.0 Handlebar is built from only the best materials, with careful and precise bending and manufacturing processes that make the SQlab 311 one of the most advanced handlebars on the market.

• 31.8mm or 27mm Clamp diameter
• Constructed from Aluminium
• Rise options 15mm / 25mm / 50mm
• Ideal for Downcountry or Trail bikes
• 740mm width

The 16° back sweep provides a natural transition from lower arm to the hand. This is especially important with handlebars of width greater than 700 mm. The 10mm forward reach almost make up for the reduced reach which the higher sweep provides. The 2.5° upsweep bring the elbows into a perfect position for a dynamic riding style.

The back sweep largely stems from the motocross arena where a similar back sweep and upsweep is custom. Only if the ergonomics are 100% perfect, you can ride at maximum pace and your body endure the associated high strain in the long run.

Also available in 27.0 mm along with a reduction shim for 31.8 mm stems. The smaller diameter increases the bar‘s flex properties. The shim - available in both plastic or aluminium – ensures a good fit of the bar in the stem and reduces the stress raisers at the edge of the stem.

The pictured stem is not included.