Nukeproof Horizon V2 Front Wheel

The Nukeproof Horizon V2 Front Wheel has been completely redesigned from the ground up and delivers fast and smooth-rolling performance across every inch of the mountain.

• Rim Material: Alloy Nukeproof Blend
• Use: MTB, All Mountain, Enduro and DH
• Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost
• Wheel Size: 27.5" or 29" options
• Inner Rim Width: 30mm
• Outer Rim Width: 35mm
• Rim Height: 21.6mm
• Tubeless Ready: Yes, pre-taped and valve supplied
• Spoke Count: 32
• Spoke Type: J-Bend
• Disc Mount: 6-Bolt
• Lacing Pattern: 3x
• Build: Hand built
• Single or Pair: Single
• Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)

This MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.

Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.

Enduro ABEC 5 Bearings - After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.

Nukeproof Horizon V2 Hub - This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately.

What's Included? - Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Conversion kits and replacement end caps available separately.